|
Materials (please see the Swedish site for pictures of accessories).
For the kajak builders
Strip kit, consisting of:
-
350m Swedish spruce milled to 5mm cove and bead
-
30m red cedar for decoration
-
20 strips 700x25x3 mm for ends are included (spruce)
-
946 ml Titebond III glue.
Epoxy kit, consisting of:
-
7.5 kg epoxy with hardener
-
Colloidal silica ca 200 gr
-
20m of twill woven fibreglass 160 gr/m2 (6 oz)
For the rowboat builders - this is more an price example as rowing boats vary more in size than the kayaks.
Strip kit, consisting of:
-
400m of Swedish spruce milled to 6 mm cove and bead
-
65m of red cedar wood for decoration
-
30 strips 1200x25x3 in oak for inner and outer bow.
-
Outer keel in profile milled oak
-
Inner keel in red cedar 5m x 15 x 100
-
Stern material mahogany plywood
-
Inner rail with scuppers ash or mahogany
-
Outer rail
This is a basic kit it will build hull.
Seats, floors rowing equipment and oars is not included because of we all have different ideas.
946 + 473 ml Titebond III glue.
Epoxy kit, consisting of:
Drawings see link page.
Transportation i Europe by truck and cost will be added.
We supply strips askfor a quote!
Strips We manufacture spruce strips 4, 5 and approximately 6.3 mm (1 / 4 ") planed cove / bead, raised spruce drop 17mm cedar of 17 and 19 mm (6.3 mm).
We stock spruce and cedar strips for immediate delivery
Strips in square oak for bows, materials for knee, transom and other
parts that may be needed.
Glue We sell Titebond III which is the best glue, it is a single component water-resistant adhesive.
Epoxy we have MAS "the blush free epoxy", which we think is the best epoxy there is.
Coating
The varnish we use is a one component clear lacquer with high UV as it is easier for the home builder to work with. Two component glue requires spray painting to become perfect.
We now only use Rylard clear varnish a 1k and a matte clear coat for the inside.
Rylards rapid varnish has become our favourite as it gives a very nice surface with nice lustre at a reasonable price.
NOTE: It doesn't have to be transparent! A strip built boat can for example be painted in one colour and then matched with clear lacquer details.
Tools
Boat Accessories
Protective equipment
-
For hands (epoxy and skin do not go together)
-
For breathing (when grinding you need a dust filter and for epoxy a different filter and yet another one for varnishes and solvents).
-
For arms, there are long protection sleeves.
Contact us for a quote.
|
